Exterior Log Home Finishes
| Brand | Cleanup | *Coverage |
Recommended Coats | Application Temp |
| Capture Log Stain |
W | 150-300 | 1-2 + 1 Cascade |
40°F to 90°F |
| Cascade Top Coat |
W | 300-600 | 1-2 Capture + 1 Cascade | 45°F and rising |
| High Sierra Log Stain |
SW |
150-450 |
2 |
40°F to 95°F |
| Lifeline Accents Exterior |
W | 350-800 | 2 | 40°F to 90°F |
| Lifeline Advance Clear Topcoat |
W | 800-1000 | 1-2 |
40°F to 90°F |
| Lifeline Ultra-2 Premium | W | 350-800 | 2 + 1-2 Advance Topcoat | 40°F to 90°F |
| Lifeline Ultra-7 Log & Deck Stain |
W | 300-400 | 1 + 1 Advance Topcoat |
40°F to 90°F |
| LifeTime Wood Treatment |
W | 125-167 | 1 | Above 32° F |
| NatureColor Base |
S | 150-300 | 2 Base or 2 Base + 1 Recoater | 50°F to 90°F |
| NatureColor Recoater | S | 300-500 | 2 Base + 1 Recoater | 50°F to 90°F |
| NatureOne | W | 160-500 | 2-3 |
50°F to 80°F |
| NatureOne Renew |
W | 175-400 | 1 | 50°F to 80°F |
| Outlast Q8 Log Oil |
W | 150-175 | 1 | Above 50°F |
| Sansin Classic |
W | 100-200 | 2 + 1 Clear UV |
60°F to 80°F |
| Sansin Wood Sealer |
W | 100-200 | 1 flood coat |
45°F to 77°F |
| Sikkens Cetol 1 |
S | 200-350 |
2 + 1 Cetol 23 Plus |
50°F to 95°F |
| Sikkens Cetol 23 Plus |
S |
200-500 | 2 Cetol 1 + 1 Cetol 23 Plus |
50°F to 95°F |
| Sikkens Log & Siding Finish |
S | 175-450 | 2 | 50°F to 95°F |
| Sikkens SRD | S |
100-300 | 1 | 50°F to 95°F |
| Sikkens WB SRD | W | 150-400 | 1 | 50°F to 80°F |
| Transformation Log Stain |
S | 150-500 | 2-3 |
40°F to 90°F |
| Transformation Log Stain Low VOC |
S | 150-500 | 2-3 |
40°F to 90°F |
| UV Guard Log Finish |
SW | 150-500 | 2 + 1 Clear | Above 40°F |
| UV Guard II Wood Finish |
SW | 150-500 | 1 Color + 1 Clear |
40°F to 90°F |
| WeatherSeal Log Finish |
S | 250-400 | 2 | 55°F to 90°F |
| Woodguard Wood Finish |
SW | 75-200 | 1-2 |
50°F to 95°F |
| WR-5 Wood Finish |
S | 200-400 | 1-3 | 50°F to 80°F |
| X-100 Natural Seal Wood Finish | SW | 100-200 | 1 | Above 50°F |
| S = Solvent W = Water SW = Either Water or Solvent (Depends on Elapsed Time) | ||||
| *Coverage: Rate based on average square feet per gallon (depending on porosity of wood surface). | ||||
| Note: All finishes that are sprayed on need to be back brushed to allow proper surface penetration. | ||||
