Sansin Classic

Sansin Classic Log FinishSansin Classic Log Finish - Since the mid 1980', The Sansin Corporation has pioneered water borne wood coatings with the development of Sansin Classic, their signature product. Sansin Classic is a time-proven three coat formulation (2 coats pigmented finish plus 1 coat of Clear UV) is a waterborne natural oil finish that penetrates deeply and bonds with the wood cells to create long lasting and easily maintained log home wood protection. Sansin Classic's base of modified natural oils is carried into the wood by a commonplace miracle of nature - water. In this way, all Sansin enviro stains are able to migrate into wood of variable moisture content and create a breathable water repellent, UV, and weather protective shield. Sansin Classic is designed for vertical wood surfaces, offering protection for: Log Homes, Siding, Fences, Old & New Wood, and Exterior Vertical Surfaces. The unique benefit of Sansin Classic is its ability to penetrate wood of variable moisture content (moisture over 19%), providing effective UV and weather protection while allowing the wood to breathe. Made in Canada.

Application Temperature:
60°F to 80°F.
Apply in early a.m., late evening or in the shade of day. Do not apply in heat of day, direct sunlight, or if surface is warm to the touch, for this will cause a surface film that may cause peeling at a later date. For Sansin Classic it will be necessary to lightly mist with water after application of product in temperatures above 70°F. If you absolutely have to apply on a hot day (above 70°F), mist the wood with water to cool the surface temperature before applying Sansin Classic; dilute Sansin Classic up to 10% with water; check periodically if the surface is getting sticky during the drying process. If sticky, lightly mist coated area with water, to re-hydrate the Sansin Classic Formula. Re-smooth with roller or paint pad. Applying in these conditions can result in surface filming. Application in these conditions should be avoided. Allow adequate time between applications. A minimum of 24 hours in proper drying conditions.
Coverage: 100-200 sq. ft. per gal.
(coverage will double for each additional coat.)
Cleanup: Soap and water.
Sheen: Flat - Low Luster.
Storage: Store between 50°F and 86°F - Do not freeze.
Sansin Classic Technical Data | MSDS 


See More Custom Order Colors


Notice: As of November 1st, 2016 finishes shipped to: CA, CO, CT, DC, ME, MN, OR, RI, & VT will include an additional $0.75 per each 1-gal and $1.60 per each 5-gal pail sold in order to comply with PaintCare State Law Legislation. (Vermont is now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org

Custom Order
All Colors Except Clear UV are Nonreturnable
Retail Price Starting At: 1-gal. $59.46   5-gal. $275.21

To Order Call 1-800-359-6614