eF-Coat Elastomeric Foundation Coating is a new product available from the Weatherall Company. A proprietary blend of latex acrylics, eF-Coat is formulated to provide an elastomeric, resilient, stucco-like finish, with excellent weathering characteristics for above grade foundations. eF-Coat is an environmentally friendly, Engineered Green Product, with a low VOC of 30g/L. It is non-toxic/ non-hazardous and is Class 1/Class A fire rated. The cured coating is mold and mildew resistant. eF-Coat is safe for exterior as well as interior uses and has no odor when cured. Do not freeze.

Architecturally Appealing
Unlike traditional mortar-based stucco products, eF-Coat is very flexible and can be applied directly to a number of substrates including concrete, concrete block, insulated concrete forms (ICF) brick, and stone. It can be troweled or sprayed on and given a variety of finishes ranging from orange peel to a smooth, steel trowel finish to a heavy knock-down. eF-Coat comes in 10 standard earth-tone color choices with custom coloring also available. This new product forms a continuous, seamless, air and water tight coating with superior adhesion. The coating provides for an excellent paintable surface for acrylic latex paints and comes in 5 gallon pails.

Easy Application
Applicators will find that this product can be applied quickly and easily. It requires only one coat with minimal prep work, is premixed – ready to use, non-cementitious and cleans up with soap and water. There is little or no maintenance. Applied with a recommended thickness of 60-80 mils, a 5 gallon pail will cover approximately 100 square feet and will be tack free in about an hour. Depending on weather conditions and the substrate, complete curing could occur within 72 hours. If using eF-Coat with concrete substrates, one coat of SCT Sealing Primer must be used to prevent the concrete surface from absorbing moisture from eF-Coat. If using eF-Coat over ICFs (Insulated Concrete Forms) apply self adhesive mesh first. eF-Coat Elastomeric Foundation Coating will help professional applicators and Do-It-Yourselfers protect and beautify their home’s foundations giving them design options that they previously did not easily and economically have.
Features & Benefits | Data Sheet | MSDS
Application Temp: 40°-90° F.
Coverage: Approx. 100 sq. ft. per 5 gallon pail at the recommended thickness of 60-80 mils (1/16" - 1/32").
Cleanup: Soap & Water.
5-gal. $235.00
Self Adhesive Mesh 38” x 150’ roll $98.00
(sold only by the roll)

SCT Sealing Primer
Prevents moisture penetration. Odorless, quick drying, easily applies with brush, roller, or airless sprayer, and environmentally safe. Do not freeze. Data Sheet | MSDS
Application Temp: 40°-90° F.
Coverage: 200-400 sq. ft. per gal.
Cleanup: Soap & Water.
Color: Clear
5-gal. $122.00