Capture, Cascade, High Sierra, and IWF
capture pailCapture Log Stain
By Sashco. An extremely effective, attractive semi-transparent stain that is followed by a weather repellent topcoat, Cascade. Capture and Cascade work together. Both are freeze-thaw stable in their containers through at least 5 freeze-thaw cycles (freezing in the container, rethawing, then freezing again, etc.) Modest sheen gives “depth” to the appearance of logs (when used in conjunction with the Cascade clear topcoat). It is highly elastic and its flexibility permits the bridging of small cracks in the surface of the wood and provides an elastic shield for the underlying wood. Two heavy coats are now recommended, especially for Almond Bark, Bronze Pine, Natural, Wheat, and other light colors. Capture also works well by itself as a one coat interior stain or can be top-coated with Symphony. Capture and Cascade are compatible with other Sashco products like PeneTreat, Conceal, Log Builder, and Log Jam.
Capture SPECS
Application Temperature 40°F to 90°F
Coats 2
Coverage
(sq. ft. per gal.)		 Smooth Surfaces:
200-300

Rough Surfaces: 150
Cleanup Soap and water.
PDF
Notes Almond Bark, Glacier Gray, and Driftwood are Special Order.
capture swatchesColors: Almond Bark, Natural,
Wheat, Bronze Pine,
Autumn Aspen, Hazelnut,
Sequoia, Chestnut,
Glacier Gray, Driftwood.
Click swatches for expanded view.
Pricing
1 gal. $46.70
5 gal. 1-4 pails $200.13
5 gal. 5+ $190.12
 cascade logo
Cascade
A heavy coat of Cascade must be applied over Capture on the exterior. This clear, protective topcoat is heavily loaded with biocides and UV inhibitors to help prevent mildew and block damaging ultraviolet light. Adds "depth" and a long-lasting satin sheen to Capture log stain. Should not be used alone on bare wood. Lab and field tests have proven the Capture System (Capture log stain plus Cascade clear topcoat) to have superb resistance to chalking, fading, cracking, peeling, and loss of overall appearance. Once Capture has dried, apply Cascade. After applying Cascade, inspect the finish twice a year and touch up areas that have become dull with a pump sprayer as needed.
Cascade SPECS
Application Temperature 45°F and rising
Coats 1
Coverage
(sq. ft. per gal.)		 300-600
Cleanup Soap and water.
PDF
Notes Works only with Capture.
Cascade Features:
Weather-repellent shield Powerful fungicide Water-based
Dries Crystal Clear Modest Satin Sheen Easy to Apply
Pricing
1 gal. $54.45
5 gal. 1-5 pails $233.15
5 gal. 6+ pails $221.49
High Sierra Log Stain logoHigh Sierra Log Stain by Sashco. Its unique blend of water and acrylic-modified alkyd resins not only provides a very easy stain to apply, but the cured coating is both stunningly beautiful and durable. High Sierra Log Stain penetrates properly prepared wood and is extremely resistant to UV degradation, moisture, and oxidation. The high quality transoxide pigments enhance the natural beauty of wood grain while imparting a mellow sheen to the logs. High Sierra is compatible with PeneTreat, Log Builder caulking, and Log Jam chinking. When used for an interior finish, it may be top coated with 1 to 2 coats of Symphony.
High Sierra SPECS
Application Temperature 40°F to 95°F
Coats 2
Coverage
(sq. ft. per gal.)		 1st Coat: 150-300

Other Coats: 250-450
Cleanup While still wet, tools and equipment can be cleaned with soap and water, or ammonia-based cleaners, like glass cleaner or household ammonia. If allowed to dry, mineral spirits will be required.
PDF
High Sierra swatches
Colors: Applewood, Bronze Sycamore, Butternut, Honey Timber, Natural Cedar, Natural Spruce, Pecan, Redwood, Tan Pine, and Woodtone Cedar.
Click swatches for expanded view.
Pricing
1 gal. $51.25
5 gal. 1-5 pails $205.00
5 gal. 6+ pails $194.75
organiclear
IWF SPECS
Application Temperature 50°F to 80°F
Coats 1
Coverage
(sq. ft. per gal.)		 200-400
Cleanup Mineral spirits or paint thinner
PDF

IWF Series by Standard Tar. Interior wood finishes available in two deep-penetrating formulas: Polyurethane (IWF-P) or Alkyd (IWF-A) based resin wood finishes. This finish is for those looking for the basic oiled look.
 Can not be sold or shipped to: California, Connecticut, D.C., Delaware, Maine, Maryland, New Jersey, New Hampshire, New York, Pennsylvania, and the North East corner of Virginia Counties: Arlington, Fairfax, Loudoun, Prince, William, and Stafford Cities: Alexandria, Fairfax, Falls Church, Fredericksburg, Manassas, and Manassa.
Ground Only
IWF-P and IWF-A
1 gal.
5 gal.
Clear & Honey
$47.35
1-8 pails $231.75
9+ pails $220.16
To Place an Order: Call Toll Free
1-800-359-6614
Prices subject to change without prior notice.