 Log-Gevity™ Log Stain & Stabilizer
Designed as the first step in a two-step process for use on vertical wood surfaces. Protects logs from ultraviolet radiation, water intrusion, and ultimate log/wood degradation by integrating metallic UV inhibitors, zinc borates, and water repellents within its formula. It extends color fastness while addressing certain harsh elevation and climate conditions. This is achieved by isolating certain solvent-borne wood stabilizing ingredients. These ingredients enable it to penetrate the wood to deeper levels, enabling the colorant to migrate further within the wood, which ultimately extends the life of the finish. Log Stain & Stabilizer stabilizes the wood, protecting the second semi-transparent coat.
 
 Log-Gevity™ Log Finish Coat
Designed as the second step in a two-step process for use on vertical wood surfaces. It consists of several essential wood protecting ingredients blended to generate a strong adhesive bond with Log Stain & Stabilizer and reinforce the UV and moisture inhibiting attributes which maintain and protect the life of the finish. Provides an aesthetically appealing, natural looking, rich warm glow commonly associated with natural wood finishes. Unlike many film forming finishes, it is breathable and will not crack or peel. Four U.V. inhibiting ingredients provide a resilient barrier that protects against damage caused by exposure to harsh climate conditions, wind and moisture erosion, and UV radiation. Apply 3-5 years after coating with Log Stain & Stabilizer.
|
|
Log Stain & Stabilizer SPECS
|
| Application Temperature |
50° F+ |
| Coats |
1 |
Coverage
(sq. ft. per gal.) |
100-400 |
| Cleanup |
Soap and water or mineral spirits. |
| PDF |
|
|
|
Cabin Gray, Chamois, Coco, Dove Gray, Forest Green, Historic Green, Pickle White, Stone Hedge, Taupe, Terra Cotta, Weathered Creosote, Weathered Gray
|
|
|
LifeTime A low maintenance finish that gives a silver patina color. Pigment obtained from your local hardware store may be added to give some color. (When using pigment, more maintenance will be required.) LifeTime goes on in one easy application by brush, roller, or spray. (It must be completely dissolved in warm water before spraying.) Initial color ranges from gray to light brown or olive brown, depending on the type of wood, but matures to a silver patina. LifeTime is for all outdoor wood. LifeTime is nontoxic, environmentally friendly, and made from naturally occurring plants and minerals. LifeTime comes in a powdered form making storage and shipping easy. 
Log Guard Interior Clear
A wood protection technology which originated in Europe and is now well proven over three decades of use in the United States and Canada. NatureColor™ is an alkyd oil based synthesis of resins, pigments, polymers, and other components combined into a finish of unusual clarity and durability. Applied by brush or sprayed in a two or three coat system, it penetrates and bonds itself to wood surfaces in a translucent weathering shield. NatureColor™ is similar to Sikkens Cetol.
NatureColor can not be sold or shipped to California, Connecticut, Deleware, Maryland, New Jersey, New York, Pennsylvania, Virginia, or Washington D.C.
NatureOne™ 100% acrylic is an evolution in translucent coatings for exterior wood. Using the latest European acrylic resin technology and transparent iron oxides, NatureOne™ provides your outdoor wood projects with the ultimate protection available. The resin used in NatureOne™ has been successfully used in Europe in the joinery business (window and door trim) for the past ten years. The tight graining in windows and doors demands adhesion qualities of a wood coating like no other area on a wood structure. NatureOne™ applied by brush or sprayed and back brushed in a two or three coat system, penetrates and bonds itself to wood surfaces in a translucent shield that when properly maintained will keep your log home looking new year after year. 
