WeatherSeal Stain Log Home Finish
E-mail this product to a friend
WeatherSeal Exterior Log Home Finish is an oil/resin-based semi-transparent wood stain that, when mixed properly, achieves a thick, pudding-like texture. WeatherSeal Log Home Finish is creamy thick yet penetrating formula "clings" to vertical surfaces, virtually eliminating the drippy mess and wasteful runoff typical of regular stains. Yet, like magic, WeatherSeal stain soaks into the wood leaving a rich natural wood appearance. Creamy smooth application, no pigment settling, and uniform coverage that soaks into the wood leaving a transparent, natural wood appearance. Its highly durable oil-based resins, waterproofers, and special performance boosters really hold up to the elements. WeatherSeal is designed for use on log homes, wood fences, wood and shake siding, pressure-treated wood and most above ground wood surfaces where a longer-lasting natural wood look is desired. For decks, apply 1-2 coats of WeatherSeal stain (use 2 coats for new, uncoated decks). Low V.O.C. clean air formula. Fortified with borates. WeatherSeal is freeze/thaw stable.
Made in the USA.
Due to the thick consistency of WeatherSeal stain, a paddle mixer is recommended to fully stir the finish before applying. See Paddle Mixers. Use a quality synthetic bristle stain brush to apply Weatherseal. Because Weatherseal contains water, the bristles in a natural bristle brush will, over time, become limp and waterlogged and lose their ability to properly hold and spread Weatherseal in an even manner. That is why a high quality synthetic bristle stain brush is recommended. Also, a good quality brush will allow for easier application and overall better appearance.
Roller Applications work especially well over rough-sawn wood surfaces, T1-11, etc. It can also be effective over smoother surfaces if the roll-applied stain is immediately back-brushed with a brush in order to even out the appearance. A 3/4” knit polyester/wool blend roller is recommended for best results.
Spray Application will work, though brush application is best. If you choose to spray, use a heavy-duty airless sprayer using 0.15 - 0.17 tips. If necessary, it can be thinned with mineral spirits at a maximum of 8 oz. of mineral spirits per gallon of stain. When sprayed, back brushing is absolutely required for proper adhesion.
Application Temperature: 55°F to 90°F.
Coverage: 250-400 sq. ft. per gal.
Cleanup: Mineral Spirits.
WeatherSeal User Guide | Technical Data | MSDS
of November 1st, 2014 finishes shipped to: CA, CT, OR, MN, RI, & VT
will include an additional $0.75 per each 1-gal and $1.60 per each
5-gal pail sold in order to comply with PaintCare State Law Legislation. To find out more go to www.paintcare.org
Cannot Ship by USPS: Priority Mail, Parcel Post, Etc.
Clear, Driftwood, and Kodiac Brown Are Discontinued