M-1 Advanced Mildewcide can be added to interior and exterior coatings when additional protection is required to control surface mold, mildew and algae growth on the coating. M-1 will not hurt the environment and is non-toxic. It does not contribute to the odor or VOC of paint. M-1 Advanced Mildewcide is recommended for use in coatings applied in high humidity environments and for applications where mildew has been a problem in the past. DO NOT treat over existing mold, mildew or algae. Always sanitize the substrate and clean thoroughly before re-coating. Prepare the surface prior to painting by cleaning and scrubbing with bleach, water and detergent. Rinse thoroughly. You may also use Outlast™ KleenStart. All visible signs of discoloration should be removed prior to re-coating. Eliminate sources of moisture whenever possible and increase air flow by cutting back shrubbery prior to re-coating. M-1 Advanced Mildewcide should still be working hard to protect the paint film after 3 years. 7.5 oz. bottle treats 5 gallons of stain/finish.
Inhibits Mildew, Mold, Algae
Pre-measured dose for 5 gallons of paint or stain
Clear in color
Add to interior or exterior coatings
Thin viscosity mixes easily
Freeze-thaw stable
Low odor – Low VOC
Suitable for use in most oil and water-based log home coatings
