   |
X-100 Wood Protective Coating is designed to penetrate wood. It is an EPA VOC compliant wood finish consisting of
essential wood protecting ingredients blended in a paraffinic oil which
is non-sensitive to ultraviolet rays. When using prior to caulking, a
one-part urethane caulk is available which will adhere to the oils in X-100 Wood Protective Coating - see Manus-Bond caulking. X-100
Natural Seal® Wood Protective Coating is for use on all vertical wood surfaces
susceptible to moisture damage including cedar, redwood, pine, plywood,
T1-11, cypress, fir, dimensional lumber, logs, and roofs. X-100 Wood Protective Coating is available in ultra transparent stains with natural
oxides. The ultra transparent technology enables the natural wood grain
to show through allowing for a natural wood finish. Same formula as the old X-100 Natural Seal Wood Preservative. Made in the USA.
Coverage: Approx. 75-200 sq. ft. per gal. Application: Apply above 50° F. with brush, roller, or spray. If spraying, use a brass tip. Apply as much as the wood will absorb; do not oversaturate. Back brush to ensure proper surface penetration. Cleanup: Mineral spirits or dish detergent & water.
Options:
|
|
