Tip: M-Balm does NOT have to be cured before applying E-Wood. Epoxies do not “dry” in the sense that they must be in contact with air. They rely on chemical reactions to harden and cure so M-Balm will harden just as rapidly under E- Wood as it will if left exposed. In fact, applying E-Wood before the M-Balm cures results in an even stronger bond to the wood.

Application Temp: 40-90 F. Do not freeze!
Coverage: Depends on wood porosity.
Cleanup: Uncured mixed M-Balm (Part A and Part B) may be cleaned up with white vinegar then flushed with water.
Drying Time: 12 to 24 hours. Cures slower in low temps. (Never change mixing rates to compensate for temperature.)
Safety: Always wear protective disposable gloves when using this product. Avoid skin contact. Skin sensitization may result from prolonged and repeated contact. If use causes soreness, redness, blistering, or other symptoms of irritation, stop use and see a physician immediately. Use with adequate ventilation. If eye contact occurs,flush with large quantities of water and contact a physician immediately. Do not use around open flame. If Part A is swallowed, induce vomiting. If Part B is swallowed, Do Not induce vomiting. Keep out of reach of children.