Drawknives and Bark Spuds
Timber Tools: Hand Forged Quality: Hand forged vs machine made. There is no comparison. Hand forged tools are the choice of professional timber framers and log builders. Forged from modern carbon steel, their shape and socketed handle give you a satisfying handling like no other tool. Hardened and tempered to a Rockwell hardness of about 60, the edge will stay sharper, longer than a machined tool of the same hardness, by a factor of 5:1.

The Drawknives are drawn from the century-old tool designs, these Medium and Large Drawknives are designed for the peeling of logs with a maximum amount of control. They are used with the beveled side down. The handles are bent to approximately 20 degrees making this a very comfortable knife to use. Hand forged from tough wear-resistant steel.
T217-DRAWKNIFE Medium 9" $139.00
T217-GUARD9DK Leather Guard $32.00

T217-DRAWKNIF12 Large 12" $149.00
T217-GUARD12DK Leather Guard $32.00
Curry and Co. Drawknives - Hand Forged - High quality drawknives from a northern Minnesota toolmaker. Razor sharp edge is angled for good control, made to last a lifetime. Barr Draw Knives - Hand Forged - Highly praised by handcrafters for its ability to hold an edge and ease of use, as well as its quality of construction. Medium and Large are designed for peeling with a maximum amount of control and used with the beveled side down. Handles are angled to approximately 20 degrees, making this a very comfortable knife to use. Professional sharpening recommended.
Medium Drawknife 9-1/2" cutting edge.
T040-DKNIVE-MD $124.18
Large Drawknife 12" cutting edge.
T040-DKNIVE-LGE $145.23
Carver’s Knife 6-1/2" cutting edge.
T021-DRAWKNIFE6 $129.67
Medium 9" cutting edge. 1/4" x 2-3/4" x 19".
T021-DRAWKNIFE9 $153.79
Large 12" cutting edge. 5/16" x 3" x 22".
T021-DRAWKNFE12 $164.39
Gränfors Bruks Draw Knife
Hand forged old world craftsmanship from the renowned forge in Sweden. Razor sharp 13" cutting edge. 25" long. T074-480486 $199.00
Peavey Drawknives
10" T163-015010DS10 $48.87
13" T163-015013DS10 $55.83

Mountain Man Gold Drawknives
Welded construction with 9" cutting blades.
19" T139-SMDRAWKNIF $173.91
21" T139-LGDRAWKIFE $190.48
Dixie Drawknives
8" T046-49941 $47.84
10" T046-49931 $56.13
13" T046-49951 $77.52
Bark Spuds “Spud” from Middle English spudde for “short knife”. The large has a 6" radius to meet the curvature of the logs. Beveled on one side.
Small 3" cutting width, 18" long. T072-SMBKSPUD $35.02
Large 5" cutting width, 52" long. T072-SPUDBKLGE $47.38
Scorp by Barr. A draw knife used for hollowing and groove cutting. 5/16" x 1-1/4" blade with a 4" diameter.
T021-SCORP $142.90
To Place an Order: Call Toll Free
1-800-359-6614
Prices subject to change without prior notice.