UV Guard Wood Finish

UV Guard Wood Finish UV Guard Wood Finish is an exterior and interior, acrylic, water-based, semi-transparent, wood finish that contains advanced UV absorbers and stabilizers. Penetrates and seals the wood surface enriching the appearance of the natural wood and at the same time shielding and protecting the wood. It normally dries within 30 minutes to an hour. Subsequent coats and complete curing may take longer. Three Coat Application: two coats of pigmented finish followed by a top coat of clear is recommended. Full color development takes place within 2 to 3 days. Made in the USA.
UV Guard Wood Finish Tech Sheet PDF UV Guard Technical Data | UV Guard Wood Finish MSDS PDF MSDS
Application Temp:
Coverage: 150-500 sq. ft. per gal.
Cleanup: Soap and Water. Dried brushes will require cleaning with lacquer thinner.
Storage: Do Not Freeze.

UV Guard is Special Order
UV Guard is Nonreturnable.
Available in 1-gal Cases (4 per case) & 5-gal Pails Only
For Current Pricing & To Order - Call 1-800-359-6614
UV Guard Wood Finish Color Swatch

Notice: Finishes shipped to: CA, CO, CT, DC, ME, MN, OR, RI, & VT will include an additional $0.75 per 1-gal and $1.60 per 5-gal pail sold in order to comply with PaintCare State Law Legislation. (Minnesota & Vermont are now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org