 |
 |
Capture Log Stain by Sashco is a log finish that is extremely effective and attractive semi-transparent stain that is followed by a weather repellent topcoat, Cascade. Capture Log Stain and Cascade work together. Both are freeze-thaw stable in their containers through at least 5 freeze-thaw cycles (freezing in the container, rethawing, then freezing again, etc.) Modest sheen gives "depth" to the appearance of logs (when used in conjunction with the Cascade clear topcoat). Capture Log Stain’s unique elastic formula allows it to move freely as your logs move, instead of cracking and peeling. Two heavy coats of Capture Log Stain are now recommended, especially for Autumn Aspen, Bronze Pine, Natural, Wheat, and other light colors. Capture also works well by itself as a one coat interior stain or can be top-coated with Symphony. Capture Log Stain and Cascade are compatible with other Sashco products like PeneTreat (Tim-bor), Conceal, Log Builder Caulking, and Log Jam Chinking. Made in the USA.
Capture Log Stain Technical Data |
SDS 
Application Temp: |
40-90º F. |
Coats: |
Exterior: 2 Capture + 1 Cascade. Interior: 1 Capture + 1 Symphony |
Coverage: |
Smooth Surfaces: 200-300 Rough Surfaces: 150 sq. ft. per gal. |
Method: |
Spray and Brush. Back-brushing required for best results. |
Surface Prep: |
Media blast, power wash, or sand wood using an Osborn brush or 60-80 grit sand paper to remove failing stains, UV-damaged, or unsound wood fibers, mill glaze, and other surface contaminants. If mildew is present, apply Sashco’s CPR in the brightener strength according to the directions, or apply fresh bleach in a 4 parts water to 1 part bleach solution. Allow to sit no longer than 20 minutes, then thoroughly rinse to neutralize the cleaner. See Technical Data for more details. |
Drying Time: |
Dries to the touch in 30 minutes or less in ideal weather. Will retain a slight tackiness until top-coated with Cascade. |
Shelf Life: |
3 years. Freeze-Thaw Stability Passes at least 5 cycles. |
Storage: |
Leftover product can be stored if the lid is tightly replaced. Store in moderate temperatures (40-90°F). |
Cleanup: |
Soap and Water. |
PaintCare Notice: Finishes shipped to: CA, CO, CT, DC, ME, MN, NY, OR, RI, VT, & WA will include an additional $0.75 per 1-gal and $1.60 per 5-gal pail sold in order to comply with PaintCare State Law Legislation. (CA is now $0.65 per 1-gal and $1.50 per 5-gal. DC is now $0.70 per 1-gal and $1.60 per 5-gal. MN & VT are now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org |