Now Available in Matte & Semigloss!
A heavy coat of Cascade Clear Top Coat must be applied over Capture Log Stain on the exterior of your log home. This clear, protective log home finish top coat is heavily loaded with biocides and UV inhibitors to help prevent mildew and block damaging ultraviolet light. Cascade adds "depth" and a long-lasting satin sheen to Capture log stain. Should not be used alone on bare wood. Lab and field tests have proven the Capture System (Capture log stain plus Cascade clear top coat) to have superb resistance to chalking, fading, cracking, peeling, and loss of overall appearance. Once Capture has dried, apply Cascade. After applying Cascade, inspect the finish twice a year and touch up areas that have become dull with a pump sprayer as needed. For Use Over Capture Log Stain Only. Made in the USA. Cascade Technical Data | SDS
||1 topcoat over 2 Capture.
||400-600 sq. ft. per gal.
||Spray and Brush. Back-brushing required for best results.
||Dust, pollen, or other contaminants can interfere with Cascade adhesion to the stained surface (and look ugly underneath it if they get trapped there). To remove these contaminants, lightly rinse down surfaces with plain water to remove them and allow surfaces to thoroughly dry. See Technical Data for more details.
||30 minutes or less in ideal weather.
||Matte: 3 years. Do Not Freeze.
Semigloss: 3 years. Freeze-Thaw Stability Passes at least 5 cycles.
||Leftover product can be stored if the lid is tightly replaced. Store in moderate temperatures (40-90°F).
||Soap and Water.
|PaintCare Notice: Finishes shipped to: CA, CO, CT, DC, ME, MN, NY, OR, RI, VT, & WA will include an additional $0.75 per 1-gal and $1.60 per 5-gal pail sold in order to comply with PaintCare State Law Legislation. (CA is now $0.65 per 1-gal and $1.50 per 5-gal. DC is now $0.70 per 1-gal and $1.60 per 5-gal. MN & VT are now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org