
Outlast™ Q8 Log Oil is an EPA registered exterior wood preservative specifically designed to control decay causing organisms (and mold, termites, powder post beetles) in log homes and on wood siding. Outlast Q8 Log Oil provides unsurpassed water repellency and sheer trans-oxide color with one coat coverage. Outlast Q8 Log Oil is a totally non-film forming exterior treatment that will never crack or peel. The trans-oxide pigment system provides excellent UV control that operates like a sunscreen to slow down graying of the wood and provide fade resistant color. The solution soaks into the wood to provide protection, not just on the surface, but also deep into the wood cell structure. Outlast Q8 Log Oil offers unique flexibility in terms of application temperature ranges, log moisture content, and delivery method. Outlast Q8 Log Oil meets all nationwide VOC requirements. Made in the USA.
- Stops decay fungi and mold - Rot control, Toxic to termites and powder post beetles
- Superior water repellency - Controls cracking and splitting
- Easy to apply - One coat coverage - low pressure spray, brush, or roll - low-pressure spray application to refusal
- No lap marks or brush marks - Simple re-coat: no stripping required
- No cob blasting, sanding, or sandblasting needed for re-coats
Technical Data |
SDS
Cannot be sold or shipped to Canada.
Application Temp: |
50° F+, though best applied on very hot, dry days. |
Coats: |
1 coat at a time is recommended. Additional applications should be applied as needed, usually every 4-8 years. |
Coverage: |
Approximately 150-300 sq. ft. per gallon for new wood. Under application is far and away the primary cause of short treatment life. |
Method: |
Spray, brush, or roll. Airless sprayers are not recommended due to excessive atomization and subsequent product loss. (Professionals may have airless equipment suitable for low-pressure applications, but do-it-yourselfers will have better results with the pump-up applicator.) |
Surface Prep: |
The log or wood surface MUST be porous. Remove mill glaze, dirt, mildew, or any film coatings before application. Avoid sanding. See Technical Data for details. |
Drying Time: |
Q8 Log Oil is very dark or greenish when first applied but lightens to the actual color after about 48 hours. Curing and full color appearance can take approximately 2 weeks. Outlast Q8 Log Oil can be caulked or chinked with a Urethane caulking after 30 days. If using a water based caulk or chinking it has to be 60 days in warm weather (Summer) and 90 days if cooler or (Spring⁄Fall). |
Shelf Life/Storage: |
When sealed properly it will last many years. Freeze-thaw Stable. |
Cleanup: |
Soap & Water. |
Note: Outlast Q8 Log Oil is exempt from PaintCare fees. |