Sansin ENS Naturals Topcoat is a durable top-coat system that can be applied to any Naturals wood-colored surface protected by ENS – from millwork, to siding, fencing and decks. ENS Naturals Topcoat is engineered as both a performance-enhancing top coat for ENS natural colors, and as a sustainable maintenance system. ENS Naturals Topcoat is highly resistant to wear, doesn’t discolor over time, and enhances the UV protection – and beauty – of your existing Sansin ENS naturals finish. Before application, ensure that the existing base coat has adequate pigmentation, especially when applying as a maintenance coat. Made in Canada.
Technical Data | SDS
||Apply in proper conditions; ideal temperature of 50-75ºF with relative humidity of approximately 50%.
||250-400 sq. ft. per gal.
||Spray application is preferred using air assist or airless spray equipment - avoid high sheer pumps. Brush using a high quality dual purpose brush.
||Stir well before and during application. Do not overwork as it is fast drying. Do not apply in heat of day, direct sun, or on wood that is warm to touch. Do not apply if rain is expected or in freezing temperatures. Surface must be clean, free from dust, dirt, grease, wax or any existing coatings. Wash entire surface and sand: See Technical Data for details.
||At 68ºF: To Touch: 40 mins. Between Applications: 4 hours.
Longer drying time needed in high humidity or low temperature.
||3 years when stored between 50-86°F - Do Not Freeze.
||Soap & Water.
|PaintCare Notice: Finishes shipped to: CA, CO, CT, DC, ME, MN, NY, OR, RI, VT, & WA will include an additional $0.75 per 1-gal and $1.60 per 5-gal pail sold in order to comply with PaintCare State Law Legislation. (CA is now $0.65 per 1-gal and $1.50 per 5-gal. DC is now $0.70 per 1-gal and $1.60 per 5-gal. MN & VT are now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org