Sansin ENS Optimum Clear is a durable crystal-clear top-coat that can be applied to any surface protected by ENS – from millwork, to siding, fencing and decks. Designed for the maintenance of previously coated surfaces. ENS Optimum Clear is engineered as both a performance-enhancing top coat for ENS, and as a long-lasting maintenance coat. ENS Optimum Clear is highly resistant to wear, doesn’t discolor over time, and enhances the natural UV protection of Sansin ENS. Add ENS base coat colors to ENS Optimum Clear for use as a maintenance coat or use to dilute colors. Always consider base coat color concentration to ensure adequate pigmentation to protect the substrate. Made in Canada. Technical Data | SDS
||Apply in proper conditions; ideal temperature of 50-75ºF with relative humidity of approximately 50%.
||250-400 sq. ft. per gal.
||Spray application is preferred using air assist or airless spray equipment - avoid high sheer pumps. Brush using a high quality dual purpose brush.
||Stir well before and during application. Do not overwork as it is fast drying. Do not apply in heat of day, direct sun, or on wood that is warm to touch. Do not apply if rain is expected or in freezing temperatures. Surface must be clean, free from dust, dirt, grease, wax or any existing coatings. Wash entire surface and sand: See Technical Data for details.
||At 68ºF: To Touch: 40 mins. Between Applications: 4 hours.
Longer drying time needed in high humidity or low temperature.
||18 months when stored between 50-86°F - Do Not Freeze.
||Soap & Water.
|PaintCare Notice: Finishes shipped to: CA, CO, CT, DC, ME, MN, NY, OR, RI, VT, & WA will include an additional $0.75 per 1-gal and $1.60 per 5-gal pail sold in order to comply with PaintCare State Law Legislation. (CA is now $0.65 per 1-gal and $1.50 per 5-gal. DC is now $0.70 per 1-gal and $1.60 per 5-gal. MN & VT are now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org