Sansin Purity Nature’s Oil: Penetrating oil for timbers, furniture, floors and other interiors. A clear, concentrated, low VOC traditional oil finish. For a natural finish, use Nature’s Oil inside your home. After all, there’s nothing warmer or more inviting than the feeling of hand-rubbed wood. Simply apply and polish this penetrating oil into wood – just one coat delivers a rich, uniform lustre that allows the grain and character of your wood to shine through. Purity Nature’s Oil is environmentally friendly, low in VOC’s, high in solids and non-flammable. A long open time means you can work the finish to create exactly the look you want. A second coat of Nature’s Oil may be applied at any time to maintain a beautiful low luster finish. Sansin Purity Nature’s Oil is a concentrate allowing you to mix it 3:1 with mineral spirits (three parts mineral spirits to one part Nature’s Oil). Mixed this way, a quart of Nature’s Oil will cover 1,000 to 2,000 sq. ft. Technical Data | SDS
||Room Temperature. (Recommended 70F and relative humidity not higher than 50%.)
||(Reduced 3:1) 1,000 to 2,000 sq. ft. per gal.
||Apply Sansin Purity Nature’s Oil with a good quality brush, a pad applicator, or by wiping. Spread consistently and liberally then remove excess using clean lint free rags, wipe or polish gently to spread product evenly and remove excess material leaving a low luster finish.
||Defects can add to the character of wood. Sansin Purity Nature’s Oil enhances that character. For defects that require repair, use only quality, solvent or oil based, tinted wood fillers to match the color of the project. Wood filler must be allowed to dry completely prior to sanding. See Technical Data pdf above for details.
||At 68ºF: 4 hours - thorough dry in 2 days. Longer drying time needed in high humidity or low temperature.
||18 months when stored between 50-86°F. Do Not Freeze.
||Clean equipment with D-Limonene or Mineral Spirits.
DANGER! Nature’s Oil is combustible. Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after use, place waste in a sealed, water-fifilled metal container to avoid spontaneous combustion.
|PaintCare Notice: Finishes shipped to: CA, CO, CT, DC, ME, MN, NY, OR, RI, VT, & WA will include an additional $0.75 per 1-gal and $1.60 per 5-gal pail sold in order to comply with PaintCare State Law Legislation. (CA is now $0.65 per 1-gal and $1.50 per 5-gal. DC is now $0.70 per 1-gal and $1.60 per 5-gal. MN & VT are now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org