Sansin SDF Naturals Topcoat is a durable top-coat system that can be applied to any SDF base coat – for substrates including siding, logs, and timbers. The high solids will build a low luster, natural finish that is highly durable to moisture and weathering. SDF Topcoat is highly resistant to wear, doesn’t discolor over time, and enhances the natural UV protection – and beauty – of your existing Sansin SDF finish. Because of its high solids content, SDF Topcoat enhances the look of your base coat with beautiful saturated color and a full, rich finish. SDF Topcoat will not crack, peel, or blister. Made in Canada. 
Technical Data | SDS 
| Application Temp: |
Apply in proper conditions; ideal temperature of 50-75ºF with relative humidity of approximately 50%. |
| Coats: |
1 Coat |
| Coverage: |
330 sq. ft. per gal. |
| Method: |
Brushing, Dipping, Spraying; hand or automated spraying (low pressure or airless). Always flood surface to the point of saturation. |
| Surface Prep: |
Do not apply in heat of day, or direct sun. Do not apply if rain or near-freezing temperatures are likely to occur within 24 hours after application. Surface must be clean. Wash entire surface and scuff sand if necessary: See Technical Data for details. |
| Drying Time: |
At 68ºF: To Touch: 4-6 hours Between Applications: 24 hours.
Longer drying time needed in high humidity or low temperature. |
| Storage/Shelf Life: |
18 months when stored between 50-86°F - Do Not Freeze. |
| Cleanup: |
Soap & Water. |
| PaintCare Notice: Finishes shipped to: CA, CO, CT, DC, ME, MN, NY, OR, RI, VT, & WA will include an additional $0.75 per 1-gal and $1.60 per 5-gal pail sold in order to comply with PaintCare State Law Legislation. (CA is now $0.65 per 1-gal and $1.50 per 5-gal. DC is now $0.70 per 1-gal and $1.60 per 5-gal. MN & VT are now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org |
