ProLuxe SRD RE is a one coat transparent exterior matte wood finish based on a special oil and alkyd resin combination. ProLuxe SRD uses a transparent iron-oxide pigmentation to provide an ultraviolet screen for logs, wall shakes, wood siding, shingles, and decks. Highly transparent, it ensures optimum visibility of the grain. ProLuxe SRD is non-film building and contains fungicide to provide protection against surface mold growth. Made in the USA.
Technical Data |
SDS
Cannot Ship to Alaska.
Application Temp: |
50-90º F. |
Coats: |
1 Coat. |
Coverage: |
Smooth Surfaces 250-400 sq. ft. per gal.
Rough & Weathered Wood: 150-250 sq. ft. per gal. |
Method: |
A natural bristle brush is the preferred method. If applied by roller or airless sprayer, back-brush immediately to ensure penetration and to avoid an uneven finish. See Technical Data for details. |
Surface Prep: |
All wood surfaces must be thoroughly clean, dry and free of dirt, grease, grime, mildew, mill glaze and previous coatings before application. See Technical Data for details. Do not apply in direct sunlight. Avoid painting late in the day when dew and condensation are likely to form, or if rain, snow or temperatures below 40°F are expected within 48 hours. |
Drying Time: |
Dry time @ 77ºF; 50% relative humidity. To Touch: 12 hours To Light Foot Traffic: 48 hours To Full Service: 72 hours. |
Shelf Life/Storage: |
3 years minimum in unopened can. Freeze-thaw Stable. Do Not Store Above 100°F. |
Cleanup: |
Mineral Spirits. |
PaintCare Notice: Finishes shipped to: CA, CO, CT, DC, ME, MN, NY, OR, RI, VT, & WA will include an additional $0.75 per 1-gal and $1.60 per 5-gal pail sold in order to comply with PaintCare State Law Legislation. (CA is now $0.65 per 1-gal and $1.50 per 5-gal. DC is now $0.70 per 1-gal and $1.60 per 5-gal. MN & VT are now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org |