X-100 Natural Seal Wood Protective Coating is designed to penetrate wood. X-100 Wood Protective Coating is an EPA VOC compliant wood finish consisting of essential wood protecting ingredients blended in a paraffinic oil which is non-sensitive to ultraviolet rays. X-100 Wood Protective Coating is for use on all vertical wood surfaces susceptible to moisture damage including cedar, redwood, pine, plywood, T1-11, cypress, fir, dimensional lumber, logs, and roofs. X-100 Wood Protective Coating is available in ultra transparent stains with natural oxides. The ultra transparent technology enables the natural wood grain to show through allowing for a natural wood finish. X-100 Wood Protective Coating is the same formula as the old X-100 Natural Seal Wood Preservative. Made in the USA. 
Technical Data | SDS | Paint Care Notice 
Cannot Ship to Alaska.
| Application Temp: | Above 50º F. |
| Coats: | 1-2 Coats. |
| Coverage: | 100-200 Roofs: 75-150 sq. ft. per gal. |
| Method: | Apply with brush, roller, or spray. If spraying, use a brass tip. Apply as much as the wood will absorb; do not oversaturate. Back-brush to ensure proper surface penetration. |
| Surface Prep: | When using prior to caulking, a one-part urethane caulk is available which will adhere to the oils in X-100 Wood Protective Coating - see Manus-Bond caulking. Surface must be cleaned of dirt, mildew, loose wood fibers, chalky residue, foreign matter and must be dry: see Technical Data for details. |
| Drying Time: | Allow at least 24 hours to dry. |
| Shelf Life/Storage: | Store in a cool place. |
| Cleanup: | Mineral spirits or dish detergent & water. |
